Openhardware Bag - Horizon Fitness T82 User Manual

BOLT ( B)
16mm
Qty: 4
LOCK W ASHER (C)
Qty: 2
ARC WASHER (D)
CONSOLE CABLES
MAINFRAME
WAVY W ASHER ( F) FLAT W ASHER ( E)
T
BOLT (D)
J
l / RIGHT LINKAGE ARM
/
FOOTLOCKLATCH \
ELEVATION FRAMECONSOLE CABLES PRE-ATTACHE
A. PuffLEAD WIREthroughRIGHT CONSOLE MASTAfter
puffing the LEAD WIREthrough the mast, the top of the
CONSOLE CABLES s houldbe locatedat the top of the
mast. Detachand discard LEAD WIRE.
B. OpenHARDWARE BAG 2
C.MoveRIGHT LINKAGE A RMinto positionand attach to
ELEVATION FRAME.
NOTE., Whileholding RIGHT CONSOLE MAST in the
upright position, tighten PRE-ATTACHEB BOLTusing
T-wrench to attach RIGHT LINKAGE A RM.
D.AttachRIGHT CONSOLE MAST to MAIN FRAME using 1
BOLT(D), 1 FLAT WASHER ( E)and 1 WAVY WASHER ( F).
E. Lift the RUNNING DECK until lock latch on side of
treaclmiflis fully engaged.
F. Remove CONSOLE from boxandplace out of the way.
G.Lowerthe treaflmifl RUNNING DECK from the folded
positionby stepping on LOCK LATCH on lowerright side.
i,
i NOTE:Ifyou have attempted to
i movethetreadmillfrom thebox
i
i and themachine hassprung
i openand cannotbe assembled,
i refer to the troubleshooting
i section in orderto restorethe
i treadmill toits proPerposition,
L_