3.4 Replacing the floppy disk drive
7. Replace the CD-ROM backplane and secure with two
screws.
8. Replace the drive bay in the chassis and secure with a
single screw.
9. Replace the power and data cables.
3.4
Replacing the floppy disk drive
Follow these instructions to replace the FDD in your TX46.
1. Remove the front and rear chassis covers as described
in section 2.2.1 Removing the chassis cover.
2. Locate the FDD drive bay and remove the power and
data cables from the backplane.
3. Remove the single screw that secures the drive bay to
the chassis.
34
Chapter 3: Replacing pre-installed components