Table of Contents
Advertisement
2.2.3 Installing memory
Follow the instructions in this section to install memory mod-
ules in your TX46 system.
1. Remove the rear chassis cover as described in section
2.2.1 Removing the chassis cover.
2. Locate the memory slots on the motherboard.
3. Press the memory slot locking levers in the direction of
the arrows as shown below.
4. The module will fit only one way in the slot. Ensure that
indentations in the memory module line up with corre-
sponding notch in the memory slot.
Chapter 2: Setting up
2.2 Installing motherboard components
Memory slots
17
Advertisement
Table of Contents
