Table of Contents
Advertisement
Tiger i7320 S5350
User's Manual
///
Tiger i7320
S5350
Revision 1.00
Copyright © TYAN Computer Corporation, 2004. All rights reserved. No part of this manual
may be reproduced or translated without prior written consent from TYAN Computer Corp.
All registered and unregistered trademarks and company names contained in this manual are
property of their respective owners including, but not limited to the following.
TYAN, Tiger i7320 S5350 are trademarks of TYAN Computer Corporation.
Intel, Nocona and combinations thereof are trademarks of Intel Corporation.
Phoenix, PhoenixBIOS are trademarks of Phoenix Technologies Ltd.
Microsoft and Windows are trademarks of Microsoft Corporation.
IBM, PC, AT and PS/2 are trademarks of IBM Corporation.
Adaptec is a trademark of Adaptec Inc.
ATI, ATI RAGE is a trademark of ATI Technologies Incorporated.
Winbond is a trademark of Winbond Electronics Corporation
SMSC is a trademark of Standard Microsystems Corporation.
Broadcom is a trademark of Broadcom Corporation.
Portable Document Format (PDF) is a trademark of Adobe Corporation.
Information contained in this document is furnished by TYAN Computer Corporation and has
been reviewed for accuracy and reliability prior to printing.
TYAN assumes no liability
whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of
TYAN products including liability or warranties relating to fitness for a particular purpose or
merchantability.
TYAN retains the right to make changes to product descriptions and/or
specifications at any time, without notice. In no event will TYAN be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other malady resulting
from errors or inaccuracies of information contained in this document.
i
http://www.tyan.com
Advertisement
Table of Contents
Related Manuals for TYAN Tiger i7320
Summary of Contents for TYAN Tiger i7320
- Page 1 S5350 Revision 1.00 Copyright © TYAN Computer Corporation, 2004. All rights reserved. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following.
-
Page 2: Table Of Contents
Tiger i7320 S5350 Table of Contents Table of Contents Before you begin… ........................v Chapter 1: Introduction......................1-1 1.1 Congratulations!......................1-1 1.2 Hardware Specifications .................... 1-1 Chapter 2: Board Installation ....................2-1 2.1 Installing the Motherboard ..................2-1 2.1.1 Installation Notes ..................... 2-1 2.2 Board Image ...................... - Page 3 Tiger i7320 S5350 Table of Contents 3.5 Security ........................3-20 3.6 Power ........................3-21 3.7 Boot.......................... 3-22 3.8 Exit ........................... 3-22 Chapter 4: SATA/RAID Setup ....................4-1 4.1 Introduction ........................ 4-1 4.2 What is RAID?......................4-1 4.2.1 RAID0 (stripping) ..................... 4-1 4.2.2 RAID 1 (mirroring)....................
- Page 4 Tiger i7320 S5350 Table of Contents Chapter 5: Diagnostics ......................5-1 5.1 Beep Codes ....................... 5-1 5.2 Flash Utility......................... 5-1 Appendix I: Glossary ......................6-1 Technical Support ......................6-7 http://www.tyan.com...
-
Page 5: Before You Begin
Tiger i7320 S5350 Before you begin… Before you begin… Check the package contents before you proceed. The retail motherboard package should contain the following: 1 x Tiger i7320 S5350 motherboard 1 x 34-Pin floppy drive cable 2 x Ultra-DMA-133/100/66/33 IDE cable 1 x Tiger i7320 S5350 User’s Manual 1 x Tiger i7320 S5350 Quick Reference Guide 1 x TYAN driver CD... -
Page 6: Chapter 1: Introduction
Tiger i7320 S5350 Chapter 1: Introduction Chapter 1: Introduction 1.1 Congratulations! Congratulations on your purchase of the powerful Dual Intel Xeon processor solution, the Tiger i7320 S5350. Based on Intel E7320 chipset, the S5350 offers exceptional performance. Compatible with EPS12V power supplies, the ATX form factor S5350 features an onboard ATi 8MB PCI RageXL VGA, two Gigabit Ethernet ports, serial ATA, RAID, which provides an advances and versatile solution for your server needs. - Page 7 Tiger i7320 S5350 Chapter 1: Introduction • Temperature and voltage monitoring BIOS Memory • Phoenix BIOS 8Mbit Flash • Dual memory channels, 8 x DIMM sockets • Supports APM 1.2 & ACPI 1.0 • Supports up to eight DDR-266/333 DIMM •...
-
Page 8: Chapter 2: Board Installation
Tiger i7320 S5350 Chapter 2: Board Installation Chapter 2: Board Installation 2.1 Installing the Motherboard The Tiger i7320 S5350 motherboard conforms fully to the ATX specification. Before continuing with the installation, confirm that your chassis supports a standard ATX motherboard. If you are unsure, contact your dealer for more information. -
Page 9: Board Image
Tiger i7320 S5350 Chapter 2: Board Installation 2.2 Board Image The following is an image of the Tiger i7320 S5350 motherboard. The above photograph is purely representative. Due to engineering updates and new board revisions, certain components may change and or be repositioned. The picture above may or may not look exactly like the board you received. -
Page 10: Block Diagram
Tiger i7320 S5350 Chapter 2: Board Installation 2.3 Block Diagram The following is a block diagram of the Tiger i7320 S5350. http://www.tyan.com... -
Page 11: Motherboard Components
Tiger i7320 S5350 Chapter 2: Board Installation 2.4 Motherboard Components The diagram below shows the main motherboard components. CPUFAN1 FAN7 USB1 CPU1 (COM1) (VGA) LAN1 BATT CPU2 LAN2 Intel S5350 E7320 LED1 JP39 64-bit 66MHz PCI-X PCIX-P1 64-bit 66MHz PCI-X PCIX-P 2 (Optional) FAN6 FAN5... -
Page 12: Jumpers And Connectors
Tiger i7320 S5350 Chapter 2: Board Installation 2.5 Jumpers and Connectors The following section gives details of the motherboard pin headers and jumpers and their functions. Pin headers are on-board connectors that can be used to connect the motherboard to peripherals. Jumpers are used to configure the motherboard. Jumper Function Settings... -
Page 13: So-Dimm Socket: J19 (Optional)
Tiger i7320 S5350 Chapter 2: Board Installation 2.5.2 SO-DIMM Socket: J19 (Optional) CPUFAN1 KB / MS KB(Bottom) This socket provides the connection to Mouse(Top) FAN7 USB1 SCSI/SATA Daughter Card (compatible with CPU1 Tyan M7902/M8110/M8120) (COM1) (VGA) LAN1 BATT CPU2 LAN2 Intel S5350 E7320... -
Page 14: Front Panel Connector: J22
Tiger i7320 S5350 Chapter 2: Board Installation 2.5.4 Front Panel Connector: J22 CPUFAN1 KB / MS KB(Bottom) Mouse(Top) FAN7 USB1 CPU1 (COM1) (VGA) LAN1 BATT CPU2 LAN2 Intel S5350 E7320 LED1 JP39 64-bit 66MHz PCI-X PCIX-P1 (Support ZCR) FAN6 64-bit 66MHz PCI-X PCIX-P 2 (Optional) FAN5 FAN4... -
Page 15: Chassis Fan Connectors With Fan Control: Fan 1/2/3/4/5
Tiger i7320 S5350 Chapter 2: Board Installation 2.5.6 Chassis Fan Connectors with Fan Control: FAN 1/2/3/4/5 CPUFAN1 Speed Control KB / MS KB(Bottom) Mouse(Top) FAN7 USB1 +12V CPU1 Tachometer (COM1) (VGA) Use these headers to connect the chassis LAN1 cooling fans to your motherboard to keep BATT CPU2 the system stable and reliable. -
Page 16: Cpu Fan1/Fan2 Connectors
Tiger i7320 S5350 Chapter 2: Board Installation 2.5.8 CPU FAN1/FAN2 Connectors +12V CPUFAN1 Tachometer Speed Control KB / MS KB(Bottom) Mouse(Top) FAN7 USB1 CPU1 (COM1) (VGA) Speed Control +12V LAN1 BATT CPU2 Tachometer LAN2 Intel S5350 E7320 LED1 Use these headers to connect the CPU JP39 64-bit 66MHz PCI-X PCIX-P1 (Support ZCR) -
Page 17: Chassis Fan Connectors: Fan6, Fan7
Tiger i7320 S5350 Chapter 2: Board Installation 2.5.10 Chassis Fan Connectors: FAN6, FAN7 CPUFAN1 KB / MS KB(Bottom) Mouse(Top) FAN7 USB1 +12V CPU1 (COM1) (VGA) Use this header to connect the chassis LAN1 BATT cooling fans to your motherboard to keep CPU2 the system stable and reliable. -
Page 18: Lan1/Lan2 Activity Led Headers: Jp21, Jp30
Tiger i7320 S5350 Chapter 2: Board Installation 2.5.12 LAN1/LAN2 activity LED Headers: JP21, JP30 CPUFAN1 KB / MS KB(Bottom) Mouse(Top) FAN7 USB1 JP21 CPU1 (COM1) (VGA) Pin 1: LED+ Pin 2: LED- LAN1 BATT CPU2 LAN2 Intel S5350 Use these headers to E7320 LED1 connect with the front... -
Page 19: Clear Cmos Jumper: Jp25
Tiger i7320 S5350 Chapter 2: Board Installation 2.5.14 Clear CMOS Jumper: JP25 CPUFAN1 KB / MS KB(Bottom) Mouse(Top) FAN7 Pin 1-2: USB1 Normal (Default) CPU1 (COM1) Pin 2-3: (VGA) Clear BIOS LAN1 BATT CPU2 LAN2 Intel S5350 E7320 LED1 Use this jumper when you forgot your JP39 system/setup password or need to clear 64-bit 66MHz PCI-X... -
Page 20: Mounting The Motherboard
Tiger i7320 S5350 Chapter 2: Board Installation 2.6 Mounting the Motherboard Before installing your motherboard, ensure that your chassis is fully compatible. The Tiger i7320 S5350 motherboard conforms fully to the ATX specification. Your chassis should include preinstalled mounting posts that match exactly with the mounting holes in the motherboard. Lay the motherboard on top of the mounting holes to ensure that all the necessary mounting posts exist in your chassis and that they match the mounting holes on the motherboard. -
Page 21: Installing Memory
Tiger i7320 S5350 Chapter 2: Board Installation 2.6.1 Installing Memory Before installing memory, ensure that the memory you have is compatible with the motherboard and processor. DDR 266/333 modules are required. Check the TYAN Web site at: www.tyan.com for details of the type of memory recommended for your motherboard. The following diagram shows common types of memory modules. -
Page 22: Memory Installation Procedure
Tiger i7320 S5350 Chapter 2: Board Installation 2.6.2 Memory Installation Procedure Follow these instructions to install memory modules into the Tiger i915 S5350. Press the locking levers in the direction shown in the following illustration. Align the memory module with the socket. The memory module is keyed to fit only one way in the socket. - Page 23 Tiger i7320 S5350 Chapter 2: Board Installation Locate the processor sockets on the motherboard and lift the locking lever as shown. Insert the processor into the socket making sure that pin 1 is correctly located. Return the locking lever to its locked position. Pin 1 Repeat this procedure for the second processor socket.
-
Page 24: Installing Drive Cables
Tiger i7320 S5350 Chapter 2: Board Installation 2.7 Installing Drive Cables IDE and FDD connectors are “keyed” to only allow insertion only one way. TYAN motherboards have two on-board IDE channels, each supporting two drives. The black connector is a standard IDE channel. Only the blue connector supports RAID. -
Page 25: Installing Expansion Cards
Tiger i7320 S5350 Chapter 2: Board Installation 2.8 Installing Expansion Cards Before installing add-in cards, you should ensure that they are fully compatible with your motherboard. For this reason, we’ve provided the diagrams below, showing the expansion slots that appear on your motherboard. Expansion cards should be pushed firmly into the appropriate slot. -
Page 26: Installing Optional So-Dimm Modules
Tiger i7320 S5350 Chapter 2: Board Installation 2.9 Installing Optional SO-DIMM modules Your Tiger i7320 (S5350) motherboard may be equipped with an optional proprietary SO- DIMM connector. The SO-DIMM connector can be used for expansion cards to provide such features as, additional SATA or SCSI support. For details of available expansions cards, visit the TYAN website at http://www.tyan.com. -
Page 27: Connecting External Devices
Tiger i7320 S5350 Chapter 2: Board Installation Key slot 2.10 Connecting External Devices Your new motherboard supports a number of different interfaces for connecting peripherals. See the diagram below. Port definitions: PS2 mouse port (green) PS2 keyboard port (purple) USB 2.0 ports Serial port (green) VGA port (blue) LAN1 Gigabit Ethernet port... -
Page 28: Installing The Power Supply
Tiger i7320 S5350 Chapter 2: Board Installation 2.11 Installing the Power Supply There are two power connectors on your Tiger i7320 S5350. The Tiger i7320 S5350 requires that you have an EPS12V power supply that has a 24-pin and an 8-pin power connector. Please be aware that using of the incompatible power supplies with the board can damage the motherboard and/or CPU(s). -
Page 29: Chapter 3: Bios Setup
Tiger i7320 S5350 Chapter 3: BIOS Setup Chapter 3: BIOS Setup 3.1 About the BIOS The BIOS is the basic input/output system, the firmware on the motherboard that enables your hardware to interface with your software. This chapter describes different settings for the BIOS that can be used to configure your system. -
Page 30: Main Bios Setup
Tiger i7320 S5350 Chapter 3: BIOS Setup system manufacturer has carefully chosen the chipset defaults for best performance and reliability. Even a seemingly small change to the Chipset setup options may cause the system to become unstable or unusable. Setup Variations Not all systems have the same BIOS setup layout or options. -
Page 31: Main
Tiger i7320 S5350 Chapter 3: BIOS Setup Boot Use this menu to configure boot options for your system. Exit This contains the various BIOS exit options. 3.3 Main In this section, you can alter general features such as the date and time, as well as access to the IDE configuration options. -
Page 32: Ide Master / Slave Setup
Tiger i7320 S5350 Chapter 3: BIOS Setup 3.3.1 IDE Master / Slave Setup Computer detects IDE drive type from drive C to drive F. Press Enter on any of the Master/Slave options to view advanced details of the corresponding drive. The system displays advanced details like the number of heads/cylinders/sectors on the detected disk and the maximum storage capacity of the disk. - Page 33 Tiger i7320 S5350 Chapter 3: BIOS Setup drives are no longer specified in terms of classical geometry, but rather in terms of their total number of user data sectors and addressed using LBA. Disabled / Enabled 32 Bit I/O Enables or disables 32 bit data transfer mode. Enabling this option causes the PCI hard disk interface controller to bundle together two 16-bit chunks of data from the drive into a 32-bit group, which is then transmitted to the processor or memory.
-
Page 34: Memory Cache
Tiger i7320 S5350 Chapter 3: BIOS Setup 3.3.2 Memory Cache This setting allows you to tweak the various cache settings for optimal performance of your system. Press Enter to display the various cache settings. Cache System BIOS Area This feature is only available when the system BIOS is shadowed. It enables or disables the caching of the system BIOS ROM at F0000h-FFFFFh via the L2 cache. -
Page 35: Boot Features
Tiger i7320 S5350 Chapter 3: BIOS Setup 3.3.3 Boot Features This option allows setting boot parameters. Press Enter to view the Boot Features screen. Summary Screen Enables or disables the display of the summary screen during boot up. When Summary Screen is Enabled (the default), a Phoenix BIOS Setup Utility summary screen appears during system boot after the power-on self-test (POST). -
Page 36: Advanced
Tiger i7320 S5350 Chapter 3: BIOS Setup Extended Memory Testing Determines the tests that will be run on extended memory (memory above 1MB) during boot Normal / Just zero it / None 3.4 Advanced This section facilitates configuring advanced BIOS options for your system. Installed OS Select the operating system installed on the PC. - Page 37 Tiger i7320 S5350 Chapter 3: BIOS Setup Large Disk Access Mode This option determines whether a hard drive with more than 1024 cylinders, more than 16 heads and or more than 64 tracks per sector is present on the system. Set this option to DOS if such a hard drive is present.
-
Page 38: Hardware Monitor
Tiger i7320 S5350 Chapter 3: BIOS Setup 3.4.1 Hardware Monitor This displays critical system parameters like CPU speed, fan speeds, voltage levels and CPU temperature. 3.4.2 Advanced Chipset Control This section allows you to fine tune the chipset configuration. Spectrum Spread When enabled, this option modulates the frequency of the CPU clock rate (and hence all clock driven mainboard components), so that any EMI interference generated is not always at the same constant frequency, but instead is spread over a small band of frequencies, therefore... - Page 39 Tiger i7320 S5350 Chapter 3: BIOS Setup Force Compliance Mode Entry: Enable or Disable PCI-E Compliance mode by setting item to the desired value. Enabled / Disabled DRAM Data Integrity Mode If you have ECC memory modules installed, select the correct ECC mode with this setting. Disabled / 72-bit ECC / 144-bit ECC / Auto ECC Error Type When an ECC error occurs, it generates an interrupt.
- Page 40 Tiger i7320 S5350 Chapter 3: BIOS Setup 3.4.2.2 Integrated LAN 1 PCI-E port A Device 2: Force PCI Express v1.0 Compatibility Mode this PCI-E Port A by setting item to the desired value. Auto / Disabled / Enabled / Force PCI Express v1.0 Compatibility Mode Option ROM Scan Initialize device expansion ROM Enabled / Disabled...
-
Page 41: Advanced Processor Options
Tiger i7320 S5350 Chapter 3: BIOS Setup Option ROM Scan Initialize device expansion ROM Enabled / Disabled 3.4.3 Advanced Processor Options This section allows you to fine-tune the processor options. Hyper Threading Technology Enable this only if you have an Intel Hyper Threading processor. Hyper-Threading Technology enables multi-threaded software applications to execute threads in parallel. -
Page 42: I/O Device Configuration
Tiger i7320 S5350 Chapter 3: BIOS Setup thermal monitor’s control circuit, when active, lowers the CPU temperature by throttling the internal CPU clock speed. This is done with a 50% duty-cycle, which means that a 2GHz CPU will then effectively run at a 1GHz clock speed. Due to the fast response time of the thermal monitor circuit (~50ns) the CPU will only be ‘throttled’... - Page 43 Tiger i7320 S5350 Chapter 3: BIOS Setup Serial Port B: This defines how the second serial port is detected and configured. Disabled / Enabled Base I/O Address: Set the base I/O address for serial port A. 3F8 / 2F8 / 3E8 / 2E8 Interrupt: Set the interrupt for serial port A.
- Page 44 Tiger i7320 S5350 Chapter 3: BIOS Setup Base I/O Address / Interrupt: This determines the base address and interrupt of the parallel port. Disabled / 378/IRQ7 / 278/IRQ5 / 3BC/IRQ7 DMA Channel This BIOS feature determines which DMA channel the parallel port should use when it is in ECP mode.
-
Page 45: Dma Event Logging
Tiger i7320 S5350 Chapter 3: BIOS Setup 3.4.5 DMA Event Logging Event Logging Select Enabled to allow logging of DMI events Disabled / Enabled ECC Event Logging Select Enabled to allow logging of ECC events Disabled / Enabled Clear all DMI event logs Setting this to ‘Yes’... -
Page 46: Console Redirection
Tiger i7320 S5350 Chapter 3: BIOS Setup 3.4.6 Console Redirection Com Port Address If enabled it will use a port on the motherboard. Disabled / On-board COM A / On-board COM B / NULL Baud Rate Enables the specified baud rate. 300 / 1200 / 2400 / 9600 / 19.2K / 38.4K / 57.6K / 115.2K Console Type Enables the specified console type. -
Page 47: Asf Configuration
Tiger i7320 S5350 Chapter 3: BIOS Setup 3.4.7 ASF Configuration Minimum WatchDog Timeout Time for BIOS to stop the WatchDog timer after a reset has occurred. BIOS Boot Timeout Time for BIOS to boot before the system is reset. OS Boot Timeout Time for OS to boot before the system is reset. -
Page 48: Security
Tiger i7320 S5350 Chapter 3: BIOS Setup 3.5 Security These settings allow you to configure the security options for your system. The system displays the current supervisor and user passwords. Set Supervisor Password This option allows the supervisor to set the supervisor password to restrict access to the BIOS settings. -
Page 49: Power
Tiger i7320 S5350 Chapter 3: BIOS Setup 3.6 Power These settings allow you to configure the power options for your system. Resume On Time When enabled, this allows the system to be woken up at a specified time. This time is specified by the Resume Time parameter. -
Page 50: Boot
Tiger i7320 S5350 Chapter 3: BIOS Setup 3.7 Boot Use this screen to select options for the Boot Settings Configuration. 3.8 Exit These settings set the exit options on your system. Exit Saving Changes This exits BIOS setup after saving the changes made. Exit Discarding Changes This exits BIOS setup after discarding the changes made. -
Page 51: Chapter 4: Sata/Raid Setup
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) Chapter 4: SATA/RAID Setup 4.1 Introduction This section describes the SATA/RAID function of your Tiger i7320 and how to configure your system. This section also covers Intel Application Accelerator RAID Edition software and its configuration. -
Page 52: Raid Migration Feature
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) 4.2.3 RAID migration feature Intel® Application Accelerator RAID Edition features is an advanced software technology called RAID migration that enables a properly configured PC, known as a “RAID Ready” system, to be converted to a high-performance RAID 0 or RAID 1configuration just by adding a Serial ATA hard drive to the system and invoking the RAID migration process. -
Page 53: Creating, Deleting, And Resetting Raid Sets
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) 4.5.1 Creating, Deleting, and Resetting RAID Sets Note Please refer to Section 4.7 for illustration examples of the Intel RAID Option ROM windows. The Serial ATA RAID set must be configured in the RAID Configuration utility. During the Power-On Self Test (POST), the following message will appear for a few seconds: Press <Ctrl-I>... -
Page 54: Reset Raid Data
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) 4.5.4 Reset RAID Data Note Please refer to Section 4.7 for illustration examples of the Intel RAID Option ROM windows. Warning All data on the RAID drives and any internal RAID structures will be lost. 1. -
Page 55: Installation Using F6 Method
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) 4.6.2 Installation Using F6 Method When you start the installation of Windows* XP, you most likely will be presented with a message stating, ‘Setup could not determine the type of one or more mass storage devices installed in your system’. -
Page 56: Using The Intel Raid Option Rom
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) 4.7.3 Using the Intel RAID Option ROM Creating, Deleting, and Resetting RAID Volumes The Serial ATA RAID volume may be configured using the RAID Configuration utility stored within the Intel RAID Option ROM. During the Power-On Self Test (POST), the following message will appear for a few seconds: Note The ‘Drive Model’, ‘Serial #’, and ‘Size’... - Page 57 Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) 1. Select option 1 ‘Create RAID Volume’ and press the <Enter> key and the following window will appear: Intel (R) RAID for Serial ATA - RAID Configuration Utility Copyright (C) 2003-04 Intel Corporation. All Rights Reserved. v3.6.0.6277 Name: RAID_Volume1 RAID Level: RAID0(Stripe) Strip Size: 128KB...
- Page 58 Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) Intel (R) RAID for Serial ATA - RAID Configuration Utility Copyright (C) 2003-04 Intel Corporation. All Rights Reserved. v3.6.0.6277 Name: RAID_Volume1 RAID Level: RAID0(Stripe) Strip Size: 128KB Capacity: 465.7 GB Create Volume Press "ENTER"...
- Page 59 Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) Intel (R) RAID for Serial ATA - RAID Configuration Utility Copyright (C) 2003-04 Intel Corporation. All Rights Reserved. v3.6.0.6277 1. Create RAID Volume 2. Delete RAID Volume 3. Reset Disks to Non-RAID 4.
- Page 60 Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) Delete RAID Volume Warning By performing this operation, all data on the RAID drives will be lost. 1. Select option 2 ‘Delete RAID Volume’ from the main menu window and press the <Enter> key to select a RAID volume for deletion.
- Page 61 Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) Intel (R) RAID for Serial ATA - RAID Configuration Utility Copyright (C) 2003-04 Intel Corporation. All Rights Reserved. v3.6.0.6277 Name Level Drives Capacity Status Bootable RAID_Volume1 RAID0(Stripe) 465.7GB Normal Are you sure you want to delete this volume? ALL DATA IN THE VOLUME WILL BE LOST !! Are you sure you want to delete volume "RAID_volume1"? (Y/N):...
-
Page 62: Installing The Intel Application Accelerator Raid Edition
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) 4.8 Installing the Intel Application Accelerator RAID Edition 4.8.1 Installation Caution Warning The Intel Application Accelerator RAID Edition driver may be used to operate the hard drive from which the system is booting or a hard drive that contains important data. - Page 63 Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) Installation: Welcome Screen Click on the ‘Next’ button after the following welcome window appears: Installation: License Agreement Carefully read through the license agreement in the following window and if you accept all the terms, click on the ‘Yes’...
- Page 64 Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) Installation: Select Program Folder Select a program folder in the following window where you would like Setup to add the program icons: Installation: Setup Status The status of the Intel Application Accelerator RAID Edition Setup will then appear in the following window: 4-14 http://www.tyan.com...
-
Page 65: Confirming The Intel Application Accelerator Raid Edition Is Installed
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) Installation: InstallShield(R ) Wizard Complete Once installation is complete, the following window will appear: 4.9 Confirming the Intel Application Accelerator RAID Edition is Installed 4-15 http://www.tyan.com... -
Page 66: Confirming Version Of Intel Application Accelerator Raid Edition Installed
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) To confirm that the Intel Application Accelerator RAID Edition has been installed, complete the following steps: • Click on Start Button / All Programs • Find the ‘Intel Application Accelerator RAID Edition’ program group •... -
Page 67: Raid Driver File Properties
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) • Then look for a parameter in the Parameters list box titled ‘Driver Version’. This should have a version number in the following format: 3.6.0.xxxx 4.10.2 RAID Driver File Properties: •... -
Page 68: Raid Ready" System Requirements
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) 4.12.2 “RAID Ready” System Requirements In order for a system to be considered “RAID Ready”, it must meet all of the following requirements: 1. System with a supported Intel chipset (currently a chipset with an Intel® 6300ESB I/O Controller Hub) and one Serial ATA (SATA) hard drive 2. -
Page 69: Raid Migration Instructions
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) 1. Create a new partition using Windows Disk Management 2. Extend the partition to fill the rest of the available space. Windows does not natively include tools to do this, but there are 3rd party software utilities to accomplish this such as PartitionMagic* or Partition Commander*. -
Page 70: Create Raid Volume From Existing Hard Drive
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) Note The ‘Physical Disks’ listed in your system can differ from the following illustration. 4.13.1 Create RAID Volume from Existing Hard Drive To create a RAID volume from an existing disk, right-mouse click on ‘Actions’ and select ‘Create RAID Volume From Existing Hard Drive’... - Page 71 Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) Note Note: Creating a RAID volume from an existing disk can also be accomplished by clicking on the ‘Actions’ file menu, and then arrow down and click on 'Create RAID Volume from Existing Hard Driver'. Select the RAID Volume Name, RAID Level, and Strip Size Select the RAID volume name, RAID level, and strip size and then click ‘Next’: RAID Volume Name:...
- Page 72 Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) For specialized usage models requiring 4KB strips For specialized usage models requiring 8KB strips 16KB Best for sequential transfers 32KB Good for sequential transfers 64KB Good general purpose strip size 128KB est performance for most desktops and workstations Create RAID Volume from Existing Hard Drive Wizard Confirm Creation of New RAID...
-
Page 73: Migration Process May Take Considerable Time To Complete
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) 4.13.2 Migration Process May Take Considerable Time to Complete The migration process may take up to two hours to complete depending on the size of the disks being used and the strip size selected. A dialog window will appear stating that the migration process may take considerable time to complete and you must click ‘Finish’... -
Page 74: Uninstalling The Intel Application Accelerator Raid Edition
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) Note The time remaining for your system can differ from the following example. If the migration process was completed successfully, you will need to reboot your system to use the entire volume capacity. Note You must reboot your system in order to use the full capacity of the new volume. -
Page 75: Unattended Installation Under Windows* Xp / Windows 2000
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) 2. Depending on your system configuration, complete one of the following set of tasks: If System has Intel RAID Option ROM Installed: a. Enter the Intel RAID Option ROM Setup by pressing the 'Ctrl' and 'i' (CTRL + i) keys at the appropriate time during boot-up. -
Page 76: Create Volume Manually
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) 4.16.2 Create Volume Manually The Intel Application Accelerator RAID Edition offers the ability to create a RAID volume. This option should be used if you are using a third bootable device such as an IDE or SCSI hard drive –... - Page 77 Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) RAID Volume Name: A desired RAID volume name needs to be typed in where the ‘RAID_Volume1’ text currently appears above. The RAID volume name has a maximum limit of 16 characters. The RAID volume name must also be in English alphanumeric ASCII characters.
-
Page 78: Successful Creation
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) Confirm Creation of New RAID Volume Confirm the creation of the new RAID volume and then click ‘Next’: 4.16.3 Successful Creation If the manual volume creation process was completed successfully, the following dialog window will appear: 4-28 http://www.tyan.com... - Page 79 Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model) 4-29 http://www.tyan.com...
-
Page 80: Chapter 5: Diagnostics
Tiger i7320 S5350 Chapter 5: Diagnostics Chapter 5: Diagnostics Note: if you experience problems with setting up your system, always check the following things in the following order: Memory, Video, CPU By checking these items, you will most likely find out what the problem might have been when setting up your system. -
Page 81: Appendix I: Glossary
Tiger i7320 S5350 Appendix I: Glossary Appendix I: Glossary ACPI (Advanced Configuration and Power Interface): a power management specification that allows the operating system to control the amount of power distributed to the computer’s devices. Devices not in use can be turned off, reducing unnecessary power expenditure. AGP (Accelerated Graphics Port): a PCI-based interface which was designed specifically for demands of 3D graphics applications. - Page 82 Tiger i7320 S5350 Appendix I: Glossary Cache size: refers to the physical size of the cache onboard. This should not be confused with the cacheable area, which is the total amount of memory which can be scanned by the system in search of data to put into the cache.
- Page 83 Tiger i7320 S5350 Appendix I: Glossary EMRL: Embedded RAID Logic. An Adaptec specific RAID technology. ESCD (Extended System Configuration Data): a format for storing information about Plug- n-Play devices in the system BIOS. This information helps properly configure the system each time it boots.
- Page 84 Tiger i7320 S5350 Appendix I: Glossary Latency: the amount of time that one part of a system spends waiting for another part to catch up. This is most common when the system sends data out to a peripheral device, and it waiting for the peripheral to send some data back (peripherals tend to be slower than onboard system components).
- Page 85 Tiger i7320 S5350 Appendix I: Glossary RAID (Redundant Array of Independent Disks): a way for the same data to be stored in different places on many hard drives. By using this method, the data is stored redundantly, also the multiple hard drives will appear as a single drive to the operating system. RAID level 0 is known as striping, where data is striped (or overlapped) across multiple hard drives, but offers no fault-tolerance.
- Page 86 Tiger i7320 S5350 Appendix I: Glossary SSI (Server System Infrastructure): an industry initiative intended to provide ready-to-use design specifications for common server hardware elements (chassis, power supplies, and racks) to promote and support server industry growth. Standby mode: in this mode, the video and hard drives shut down; all other devices continue to operate normally.
-
Page 87: Technical Support
Tiger i7320 S5350 Technical Support Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. - Page 88 Tiger i7320 S5350 User’s Manual Notice for the USA Compliance Information Statement (Declaration Conformity Procedure) DoC FCC Part 15: This device complies with part 15 of the FCC Rules Operation is subject to the following conditions: This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation.