Table of Contents
Advertisement
2.4
Rack mounting
Follow these instructions to mount the TX46 into an industry
standard 19-inch rack.
Note:
in a rack, ensure that all internal components
have been installed and that the unit has
been fully tested. Maintenance can be per-
formed on the unit while in a rack but it is
preferable to install the device in a fully oper-
ational condition.
1. Attach the mounting ears to the TX46 as shown using
four screws from the supplied nuts, screws, and washers
kit.
2. Attach the sliding rail mounting brackets to the sliding
rails as shown, using the short black screws from the
supplied nuts, screws, and washers kit.
3. Fully extend the sliding rails until they lock.
Chapter 2: Setting up
Before mounting the Transport TX46
2.4 Rack mounting
23
Advertisement
Table of Contents
