Installing Cpus - TYAN Transport TX46 (B4882 User Manual

2.2 Installing motherboard components

2.2.2 Installing CPUs

This section describes how to install AMD Opteron proces-
sors and heat sinks in your TX46 system.
Note:
CPUs. CPU0 must be installed first followed
by 1, 2, and 3.
1. Remove the rear chassis cover as described in section
2.2.1 Removing the chassis cover.
2. Locate the processor sockets on the motherboard.
CPU2
3. Lift the locking lever as shown.
14
The system supports up to four
CPU3 CPU1
CPU0
Chapter 2: Setting up