3.2.2 Replacing the motherboard
Follow these instructions to remove the motherboard from
your TX46.
Note:
remove all cable connections to the mother-
board. See section 3.2.1 Disconnecting all
motherboard cables.
1. Remove the rear chassis cover. See 2.2.1 Removing the
chassis cover
2. Remove the heat sinks and processors if installed. See
2.2.2 Installing CPUs.
3. Remove the ten screws that secure the motherboard to
the chassis.
Chapter 3: Replacing pre-installed components
3.2 Replacing motherboard components
Before proceeding, you must
31