Appendix; Bios; Introduction; Bios Setup Utility - TYAN Transport TX46 (B4882 User Manual

Hide thumbs Also See for Transport TX46 (B4882:

Table of Contents

Your Transport TX46 (B4882) system includes a powerful

TYAN Thunder K8QS S4882 motherboard with Phoenix

BIOS on 4 MB LPC flash ROM.

The BIOS is the motherboard's basic input/output system.

The BIOS contains all the settings required to control the key-

board, display, disk drives, serial communications, and a

number of miscellaneous functions. This section of the

appendix describes the various BIOS settings that can be

used to configure your system.

With the BIOS setup utility, you can modify BIOS settings and

control the special features of your computer. The setup util-

ity uses a number of menus for making changes and turning

the special features on or off.

Note:

system. The actual menus displayed on your

screen may be different and depend on the

hardware and features installed in your com-

puter.

To start the BIOS setup utility:

1. Turn on or reboot your system.

2. Press <F2> during POST to start the BIOS setup utility.

All menus are based on a typical

Appendix

Table of Contents

B4882