TYAN Transport TX46 (B4882 User Manual page 43

4. Slide the drive housing back and lift it free from the chas-
sis.
5. If no FDD is installed, you will need to remove the blank-
ing plate from the front panel and the grill from the front of
the drive bay as shown.
6. Install a new FDD in the bay and secure with four screws.
7. Replace the drive tray in the chassis and secure with a
single screw.
8. Replace the power and data cables.
Chapter 3: Replacing pre-installed components
3.4 Replacing the floppy disk drive
Front panel blanking plate
35