To Disable A Rke Transmitter Linked To Memory - Jeep Commander Owner's Manual

To Disable A RKE Transmitter Linked to Memory

1. Turn the ignition switch to the LOCK position, and
remove the key.
2. Press and release memory button number 1. The
system will recall any memory settings stored in position
1. Wait for the system to complete the memory recall
before continuing to Step 3.
3. Press and release the memory S (SET) button located
on the driver's door.
4. Within five seconds, press and release memory button
1 on the driver's door.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137
5. Within five seconds, press and release the UNLOCK
button on the RKE transmitter.
To disable another RKE transmitter linked to either
memory position, repeat steps 1 through 5 for each RKE
transmitter.
NOTE: Once programmed, all RKE transmitters linked
to memory can be easily enabled or disabled at one time.
Refer to Remote Linked to Memory under Electronic
Vehicle Information Center (EVIC) — Customer-
Programmable Features
information.
in Section 4 for more
3