Jeep Commander Owner's Manual page 217

Easy Entry/Exit Seat (Available with Memory Seat
Only)
This feature provides automatic driver seat positioning to
enhance driver mobility when entering and exiting the
vehicle. To make your selection, press and release the
FUNCTION SELECT button until YES (Y) or NO (N)
appears.
NOTE: The seat will return to the memorized seat
location (if Recall Memory with Remote Key Unlock is set
to ON) when the RKE transmitter is used to unlock the
door. Refer to "Easy Entry/Exit Seat" under "Driver
Memory Seat" in Section 3 of this manual for more
information.
Key Off Power Delay
When this feature is selected, the power window
switches, radio, hands–free system (if equipped), DVD
video system (if equipped), power sunroof (if equipped),
and power outlets will remain active for up to 60 minutes
after the ignition switch is turned off. Opening a vehicle
UNDERSTANDING YOUR INSTRUMENT PANEL 215
door will cancel this feature. To make your selection,
press and release the FUNCTION SELECT button until
"Off," "45 sec.," "5 min.," or "10 min." appears.
Illuminated Approach
When this feature is selected, the headlights will activate
and remain on for up to 90 seconds when the doors are
unlocked with the RKE transmitter. To make your selec-
tion, press and release the FUNCTION SELECT button
until "OFF," "30 sec.," "60 sec.," or "90 sec." appears.
Hill Start Assist
When on is selected, the HSA system is active. Refer to
"HSA (Hill Start Assistance)" under "Electronic Brake
Control System" in Section 5 of this manual for system
function and operating information. To make your selec-
tion, press and release the FUNCTION SELECT button
until "ON" or "OFF" appears.
4