Jeep Commander Owner's Manual page 42

40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Also, the power liftgate may be closed by pressing the
Liftgate switch located on the left rear trim, near the
liftgate opening. Pressing once will close the liftgate only.
This button cannot be used to open the liftgate.
Rear Liftgate Switch
When the LIFTGATE button on the Fob with Integrated
Key (FOBIK) is pressed two times and the "Lamp Flash"
feature is enabled, the turn signals will flash twice to
signal that the liftgate is opening or closing.
NOTE:
In the event of a power malfunction to the liftgate, an
emergency liftgate latch release can be used to open
the liftgate. The emergency liftgate latch release can be
accessed through a snap-in cover located on the lift-
gate trim panel.
WARNING!
During power operation, personal injury or cargo
damage may occur. Ensure the liftgate travel path is
clear. Make sure the liftgate is closed and latched
before driving away.
A beeping signal will sound two seconds before the
liftgate starts to open or close.