Jeep Commander Owner's Manual page 108

106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Connect or Disconnect Link Between the
UConnect System and Cellular Phone
Your cellular phone can be paired with many different
electronic devices, but can only be actively connected
with one electronic device at a time.
If you would like to connect or disconnect the Bluetooth
connection between a UConnect paired cellular phone
and the UConnect system, follow the instructions de-
scribed in your cellular phone User's Manual.
List Paired Cellular Phone Names
Press the PHONE button to begin.
After the "Ready" prompt and the following beep, say
"Setup Phone Pairing."
When prompted, say List Phones.
The UConnect system will play the phone names of
all paired cellular phones in order from the highest to
the lowest priority. To "select" or "delete" a paired
phone being announced, press the VOICE RECOGNI-
TION button and say "Select" or "Delete." Also, see
the next two sections for an alternate way to "select"
or "delete" a paired phone.
Select Another Cellular Phone
This feature allows you to select and start using another
phone paired with the UConnect system.
Press the PHONE button to begin.
After the Ready prompt and the following beep, say
Setup Select Phone and follow the prompts.
You can also press the VOICE RECOGNITION button
at any time while the list is being played, and then
choose the phone that you wish to select.
The selected phone will be used for the next phone
call. If the selected phone is not available, the
UConnect system will return to using the highest
priority phone present in or near (approximately
within 30 ft (9 m)) the vehicle.