EverFocus PowerPlex EDR-920 Installation & Operation Manual page 73

PTZ CONTROL
The EDR DVR allows the speed dome and PTZ device control via network.
Select "PTZ CONTROL" to activate the telemetry mode.
Select the camera in the PTZ CAM field.
The following control functions are available:
1. Camera selection
2. Key mode:
3. Directional arrows: Pan / tilt control keys
4. Z+ / Z-:
5. Focus:
6. IRIS:
7. PRESET:
8. AUTO PAN:
Pan/tilt/zoom key reaction type
Continuous – control command is sent continuously
Step x 10 – 10 single commands per keystroke are sent
Step x 5 - 5 single commands per keystroke are sent
Step x 1 – 1 single command per keystroke is sent
Zoom function Z+: Tele, Z-: Wide
manual focus
NEAR: near range,
FAR: tele range
manual iris control
OPEN: open iris
CLOSE: close iris
Preset selection
SET: Save current PTZ position as selected preset number
CLR: Delete the selected preset position
JUMP: Approach the selected preset position
Automatic pan function
RUN: start AUTO PAN
STOP: stop AUTO PAN
72