EverFocus PowerPlex EDR-920 Installation & Operation Manual page 52

3.11.3 NO HDD
WARNING SETUP MENU
FAN FAULT BUZZER
HDD TEMP. ALARM OUTPUT
NO HDD ALARM DURATION PERMANENT
HDD FULL NETWORK ALARM NO
EMAIL
The DVR detects when both harddisks are removed, switched off or not detected. Define the
alarm reactions in this menu item:
(1) BUZZER: By selecting "ENABLE", the buzzer is activated.
(2) ALARM OUTPUT: Output relay activation.
1 – Output relay 1 ~ 4 (selection) switches upon alarm.
NONE – no output relay reaction upon alarm.
(3) ALARM DURATION: Alarm duration adjustment from 1~99 seconds or permanent.
(4) NETWORK ALARM:
YES: Network alarm activated (for settings refer to NETWORK menu)
Network alarm reception requires optional PowerCon software.
NO: No network alarm transmission
(5) EMAIL:
YES: Alarm email transmission (for settings refer to NETWORK menu).
NO: No email alarm transmission.
ENABLE
1
NO
51