EverFocus PowerPlex EDR-920 Installation & Operation Manual page 41

(10) AREA SETUP
With activated motion detection, the sub menu for setting up detection areas can be
entered by pressing the SELECT key.
Use the DISPLAY key to show all function keys available for this menu at any time.
DISPLAY KEY FOR HELP
DISPLAY KEY FOR HELP
Moving test: The triggered areas are shown in red. Adjust the sensitivity settings if required.
Delete all areas: Press the PLAY key to delete all areas.
On-screen help menu (start with DISPLAY):
MENU - EXIT
COPY - SELECT AREAS
ENTER - DIRECTION
SEARCH - ACTIVATE AREAS
PAUSE - DEACTIVATE AREAS
Active areas are shown in green.
Press the COPY key to start the selection.
Use the JOG to raise a window and use the
ENTER key to switch the jog direction
between vertical
Having selected the requested window, use
the SEARCH key to activate the selected
areas.
Use the PAUSE key to deactivate the
selected areas.
If several or combined detection areas are
required, this procedure kann be repeated
as often as necessary.
Press the MENU key to leave this sub menu.
40
and horizontal .