Connections - EverFocus PowerPlex EDR-920 Installation & Operation Manual

1.5 CONNECTIONS

4
3
14
15
Main switch: Power switch, below IEC socket for 100~240 VAC power source
1
Audio inputs: Audio inputs 1 ~ 4
2
Audio output: Audio output
3
MAIN monitor: Main monitor for live and playback display and on-screen display
CALL monitor: CALL monitor output. Spotmonitor for full screen live display, sequence
4
mode and alarm camera switching
5
Video inputs:
EDR920:
VIDEO IN(1~9): BNC video inputs for 1 Vpp Composite video signals, automatic 75 Ohm
EDR1640:
VIDEO IN (1~16): BNC video inputs for 1 Vpp Composite video signals, automatic 75 Ohm
Alarm and control inputs / outputs (for connection assignment, refer to appendix C)
6
ALM-INPUT:
ALM-OUTPUT: 4 x NO/NC alarm output relay
REC-IN:
5
8
2 7
9
13
termination (high impedance switching upon loop-through output load)
termination (high impedance switching upon loop-through output load)
9 (EDR920) resp. 16 (EDR1640) alarm inputs for dry contacts,
programmable NO or NC in the menu.
Input contact for recording start, NO, for dry contacts
6
11
12
EDR1640 back panel (EDR920 identical, 9 video inputs)
10
1
10