Call- / Matrix Monitor Setup - EverFocus PowerPlex EDR-920 Installation & Operation Manual

7. CALL / MATRIX MONITOR SETUP
Enter the call and matrix monitor setup menu by pressing the CALL key:
CALL MENU
MONITOR
CALL MON
MATRIX MON 1
MATRIX MON 2
MATRIX MON 3
MATRIX MON 4
PRESS SEQ/MIDDLE TO ON/OFF SEQ
PRESS DISPLAY TO ON/OFF OSD
PRESS CHANNEL NO/WHEEL TO SET CAMERA
Define the following settings in the CALL menu:
Press ENTER to select the respective monitor and the selection options:
(1) SEQ: "ON" activates the monitor's sequence mode (automatic sequential switch).
(2) OSD: "ON" activates the monitor's status display including camera number,
monitor number and active alarms for this monitor.
(3) CAMERA: Select the camera to be displayed with the channel keys 1~9 (EDR920) resp.
1~16 (EDR1640).
SEQ OSD CAMERA
OFF ON 01
OFF ON 01
OFF ON 01
OFF ON 01
OFF ON 01
64