Warning - EverFocus PowerPlex EDR-920 Installation & Operation Manual

3.11 WARNING MENU
The EDR provides warning functions allowing signalling upon operation failure. Define the
alarm reactions in the WARNING menu.
3.11.1 FAN FAILURE
WARNING SETUP MENU
FAN FAULT
HDD TEMP.
NO HDD
HDD FULL
Both fans provide failure detection. Define the alarm reactions upon fan failure in this menu
item:
(1)BUZZER: By selection "ENABLE", the buzzer is activated upon fan failure.
(2)ALARM OUTPUT: Output relay activation.
(3) ALARM DURATION: PERMANENT - This value cannot be changed, alarm is
(4) NETWORK ALARM:
(5) EMAIL:
BUZZER ENABLE
ALARM OUTPUT 1
ALARM DURATION PERMANENT
NETWORK ALARM NO
EMAIL NO
1 – Output relay 1 (for EDR410/810, only one output relay is available)
NONE – no relay reaction upon alarm.
automatically switched off after problem has been solved
(fan replacement).
YES: Network alarm activated (for settings refer to NETWORK menu)
Network alarm reception requires optional PowerCon software.
NO: No network alarm transmission
YES: Alarm email transmission (for settings refer to NETWORK menu).
NO: No email alarm transmission.
49