Table of Contents
Advertisement
3.11.3 NO HDD
WARNING SETUP MENU
FAN FAULT
BUZZER
HDD TEMP.
ALARM OUTPUT
NO HDD
ALARM DURATION
HDD FULL
NETWORK ALARM
EMAIL
The DVR detects when both harddisks are removed, switched off or not detected. Define
the alarm reactions in this menu item:
(1) BUZZER:
(2) ALARM OUTPUT:
(3) ALARM DURATION: Alarm duration adjustment from 1~99 seconds or permanent.
(4) NETWORK ALARM:
(5) EMAIL:
ENABLE
1
PERMANENT
NO
NO
By selecting "ENABLE", the buzzer is activated.
Output relay activation.
1
Output relay 1 switches upon alarm.
NONE
no output relay reaction upon alarm.
YES:
Network alarm activated (for settings refer to
NETWORK menu)
Network alarm reception requires optional PowerCon
software.
NO:
No network alarm transmission
YES:
Alarm email transmission (for settings refer to
NETWORK menu).
NO:
No email alarm transmission.
- 48 -
EDR910_1610_ma_en_rev1 00
Advertisement
Table of Contents
