Table of Contents
Advertisement
(5) REC QUALITY:
(6) REC SPEED ON TIME ZONE:
TP:
N:
NORMAL:
EVENT:
ACT (active): Indication of whether the individual timer is activated.
Individual recording quality setting for this camera (within
the resolution defined in RECORDING menu):
SUPERIOR
HIGH
STANDARD
BASIC
LOW
LOWER
Using the VBR (Variable Bit Rate) method, the storage
requirement per image depends on the image's colour and
contrast content and captured motion.
For recording time sample tables, please refer to
Appendix D.
The EDR DVR offers 8 different timers for scheduled
recording. The settings of the last row "N" (normal) apply
to those periods not captured by a timer schedule (setup
in TIMER menu)
For recording rate, the following steps are available:
1;2;3;4;5;6;8;10;12,5;25 images/s.
In case no timer is activated, the DVR only operates
according to the settings of row "N".
Timer program 1~8, schedule setup and activation are
defined in the TIMER menu.
(Normal) all periods not captured by a timer schedule.
In case no timer is activated, the DVR only operates
according to these settings.
IPS recording rate for manual or scheduled recording and
recording controlled through "REC IN" input contact. The
maximum image rate is limited to:
Max. image rate per camera = max. DVR recording rate /
number of installed cameras.
Max. DVR recording rate depends on recording resolution:
360x288: 100 images / second
720x288: 50 images / second
720x576: 25 images / second
Example:
EDR1610 with 12 installed cameras, resolution 720x288:
50 IPS : 12 = 4,1 IPS > maximum adjustable recording
rate per camera: 4 IPS
IPS recording rate for event recordings (alarm contacts,
motion detection), maximum adjustable recording rate is
25 IPS.
Settings are carried out in TIMER menu.
ON: timer activated; OFF: timer deactivated
- 28 -
EDR910_1610_ma_en_rev1 00
Advertisement
Table of Contents
