Table of Contents
Advertisement
3.3 RECORDING MENU
RECORDING
TIME STAMP
TIME STAMP POS.
WATERMARK
WATERMARK POS.
RESOLUTION
RECORD MODE
PRE-ALARM
Define the following settings in the recording menu:
(1)TIME STAMP:
(2) TIME STAMP POS.:
(3) WATERMARK :
(4) RESOLUTION:
DVR PAL recording resolution is adjustable as follows:
720x288 (Half D1),
720x576 (D1) ,
or
360x288 (CIF) ,
(5) RECORD MODE:
(6) PRE-ALARM:
OFF
BOTTOM
OFF
TOP
720X288
REWRITE
OFF
ON:
OFF:
TOP:
BOTTOM:
ON:
OFF:
REWRITE: If the harddisk is full, the DVR starts to
STOP:
ON:
OFF:
- 30 -
Recording is overlaid by time and date.
Recording doesn't provide time/date stamp.
Time / date is displayed at the top screen
margin.
Time / date is displayed at the bottom
screen margin.
Recording is overlaid by a visible watermark
("W").
No watermark.
Default setting,
total recording rate 50 IPS
total recording rate 25
total recording rate 100 IPS
overwrite the harddisk, previous recordings
are deleted automatically.
If the harddisk is full, the DVR stops
recording (for signalling, refer to
WARNING menu).
a pre-alarm record is provided for motion
and contact alarms (5~10 sec depending on
recording settings)
no pre-alarm record
EDR910_1610_ma_en_rev1 00
Advertisement
Table of Contents
