Table of Contents
Advertisement
3.2 CAMERA MENU
CAMERA
CAMERA1
CAMERA2
CAMERA3
CAMERA4
CAMERA5
CAMERA6
CAMERA7
CAMERA8
CAMERA9
SUMMARY
Menu display for EDR-910, EDR1610 identical, but with 16 cameras.
The most important recording operation settings are defined in the CAMERA menu.
Before changing the settings in this menu, recording has to be stopped.
Each camera is set individually:
(1) NAME:
Enter the video channel description with max. 12 characters each.
Available characters are (select with JOG):
0,1,2,3,4,5,6,7,8,9,
A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,
( ) . , + - / and space
(2) PTZ ID:
Enter the RS-485 receiver address of a speed dome or telemetry receiver
camera connected to this video channel.
(3) INSTALL / COVERT:
INSTALL (first position):
ATTENTION: The manual setting is compulsory, autodetection for connected cameras is
not available!
COVERT (second position): A camera programmed COVERT "ON" will not be
(4) SEQ(MAIN/CALL):
ATTENTION: Some Pelco-D / -P protocol domes and receivers require an address offset
of -1, i.e. the address assigned to the dome / receiver in the DVR camera menu must be
1 below the address set in the dome / receiver itself!
TITLE
CH1
PTZ ID
01
INSTALL/COVERT
ON/OFF
SEQ (MAIN/CALL)
03/03 SECS
REC QUALITY
HIGH
REC SPEED ON TIME ZONE
TP NORMAL
EVENT
SET
1
5 IPS
25 IPS
OFF
2
5 IPS
25 IPS
OFF
3
5 IPS
25 IPS
OFF
4
5 IPS
25 IPS
OFF
5
5 IPS
25 IPS
OFF
6
5 IPS
25 IPS
OFF
7
5 IPS
25 IPS
OFF
8
5 IPS
25 IPS
OFF
N
5 IPS
25 IPS
OFF
All connected cameras have to be set to ON,
all not connected cameras are set to OFF.
displayed, but recorded at defined parameters.
Camera dwell time in sequence operation (automatic
switching) for main (first position) and call (second
position) monitor
- 27 -
EDR910_1610_ma_en_rev1 00
Advertisement
Table of Contents
