Table of Contents
Advertisement
(4) DURATION:
Alarm duration for N.O. and N.C. contact types. Duration applies to recording, screen
change, buzzer and output contact and is adjustable from 1~99 seconds.
(5) ALARM OUTPUT:
Output relay activation.
(6) ALARM EMAIL:
By selecting "ON", an email is sent in case of alarm, containing the alarm message, the
camera's alarm image and the DVR IP address as sender.
Define the email recipiant's details in the NETWORK menu.
(7) BUZZER:
Alarm buzzer activation
(8) ALARM NETWORK:
Network alarm function activation. Network alarm reception requires installation of the
optionally available PowerCon software. The network alarm transmits both the alarm
message and the DVR IP address as sender to up to 3 recipiants.
(10) MAIN MON: Alarm reaction on MAIN monitor in case of alarm.
(11) CALL MON: Alarm reaction on CALL monitor in case of alarm.
(12) SUMMARY
The SUMMARY menu item gives a summary on the settings for control purpose.
Use the JOG to browse the individual settings.
ATTENTION: This menu does not allow any editing of settings.
1:
NONE:
ENABLE:
DISABLE:
YES:
NO:
NO CHANGE:
FULL SCREEN:
NO CHANGE:
Camera 1~9 (16): Monitor displays full screen image of the
- 32 -
Output relay 1 is switched
in case of alarm
Output relay is deactivated.
Alarm buzzer is activated.
Alarm buzzer is deactivated.
Network alarm is activated.
Network alarm is deactivated.
The currently selected main monitor
display does not change.
Monitor displays the alarm camera (see
(3)) image in full screen.
The currently selected call monitor display
does not change.
camera defined within the menu item.
EDR910_1610_ma_en_rev1 00
Advertisement
Table of Contents
