Activating The Idsl Ports; Configuring Patton Idsl Cpe Device Remotely Via The Model 3196Rc; Idsl Port Configuration Window - Patton electronics 3196RC User Manual

Idsl tdm-digital access concentrator (t-dac)

Hide thumbs Also See for 3196RC:

Table of Contents

Model 3196RC T-DAC User Manual

Activating the iDSL ports

Do the following to activate an iDSL port:

1. On the 3196RC Configuration Menu, click the DSL hyperlink to display the iDSL Port Configuration

page (see

figure

33). (Optional: Using your mnemonic naming convention scheme, enter a name for this

connection in the "Circuit ID" field to the right of the Port # you wish to activate).

2. From the Desired State drop-down menu, select activate(1).

3. Click the "Submit" button to record your changes in volatile DRAM.

You have now completed the procedure to activate one iDSL port. To activate additional iDSL ports, repeat

the above procedure for each port you wish to activate.

Once an iDSL link is established between the 3196RC port and a Patton Customer Premise Equipment (CPE)

iDSL device, (such as the Model 3092) you may use the 3196RC Web Management pages to remotely config-

ure DSL port parameters on the CPE device. The following DSL port parameters may be configured remotely:

•

Serial DTE Rate

Using a browser to complete Model 3196RC configuration

Figure 33. iDSL Port Configuration window

3 • Configuring the T-DAC for operation

Table of Contents