Site Log; Network Information; Network Diagram; Ip Related Information - Patton electronics SmartNode 4520 Series Getting Started Manual

Model 4520 & 4110 Series Getting Started Guide

Site log

Patton recommends that you maintain a site log to record all actions relevant to the system, if you do not
already keep such a log. Site log entries should include information such as listed in
Installation
Upgrades and maintenance
Configuration changes
Maintenance
Comments

Network information

Network connection considerations that you should take into account for planning are provided for several
types of network interfaces are described in the following sections.

Network Diagram

Draw a network overview diagram that displays all neighboring IP nodes, connected elements and telephony
components.

IP related information

Before you can set up the basic IP connectivity for your SmartNode 4000 series you should have the following
information:
• IP addresses used for Ethernet LAN and WAN ports
• Subnet mask used for Ethernet LAN and WAN ports
• IP addresses of central H.323 Gatekeeper (if used)
• IP addresses of central PSTN Gateway for H.323 and/or ISoIP based calls
• IP addresses of central TFTP Server used for configuration upload and download

Software tools

You will need a PC (or equivalent) with a VT-100 emulation program (e.g. HyperTerminal) to configure the
software on your SmartNode router.

Power source

If you suspect that your AC power is not reliable, for example if room lights flicker often or there is machinery
with large motors nearby, have a qualified professional test the power. Install a power conditioner if necessary.
Planning the installation
VoIPon www.voipon.co.uk
Table 5. Sample site log entries
Entry
Make a copy of the installation checklist and insert it into the site log
Use the site log to record ongoing maintenance and expansion history
Software
sales@voipon.co.uk
Description
Record all changes and the reasons for them
Schedules, requirements, and procedures performed
Notes, and problems
Changes and updates to SmartWare software
Tel: +44 (0)1245 808195
3 • Hardware installation
table 5.
37
Fax: +44 (0)1245 600030