Track Mode - Rigol DS1000D series User Manual

RIGOL

Track Mode

Figure 2- 122 Table 2- 81 The Track Mode menu
In cursor track mode, the cursors move together with the selected waveform.
To do Track mode Cursor Measurements, follow these steps:
1. Select the Track mode for cursor measurement by pressing soft button as:
Cursor→Mode→Track.
2. Select channel Source for Cursor A and Cursor B by pressing soft button as:
Cursor→Cursor A or Cursor B→CH1, CH2 or None.
3. Move the cursors to adjust the horizontal positions of the cursors: (Details in the
following Table)
Table 2- 82 The Cursor usage
Cursor
Cursor A Turn the multifunctional knob (
Cursor B Turn the multifunctional knob (
2-102
Menu Settings
Mode Track
Cursor A
None
Cursor B
None
CurA
(Cursor A)
CurB
(Cursor B)
User's Guide for DS1000E, DS1000D Series
Set Track
measurement
CH1
Set Cursor A in conjunction with
CH2
CH1, CH2 or turn off Cursor A
CH1
Set Cursor B in conjunction with
CH2
CH1, CH2 or turn off Cursor B
Turn the multifunctional knob (
to move cursor A horizontally
Turn the multifunctional knob (
to move cursor B horizontally
Operation
) to move cursor A horizontally
) to move Cursor B horizontally
Comments
mode in
© 2008 RIGOL Technologies, Inc.
cursor
)
)