To Set Up The Sampling System - Rigol DS1000CA series User Manual

RIGOL

To Set Up the Sampling System

Figure 2-55 shows the menu button for acquire system on the front panel.
Press Acquire button, the interface menu shows as follows:
Figure 2-56 Table 2-34 The Acquire menu
NOTES:
[1] This function appears when acquisition as "Average".
[2] This function appears when sampling as "Real-Time".
[3] Sample rate of CH1 and CH2 will be displayed respectively in alternative trigger
mode.
2-46
Acquire Setup Button
Figure 2-55 Acquire button
Menu
Settings
Normal
Acquisition Average
Peak Detect
[1]
Averages 2 to 256
Real-Time
Sampling
Equ-Time
ON
[2]
Sinx/x
OFF
[3]
Sa Rate
Comments
Normal Acquisition mode.
Average Acquisition mode.
Peak Detect Acquisition mode.
Step by 2 N times the power. Set
average times from 2 to 256.
Real-time sampling mode.
Equivalent sampling mode.
Set the insert mode is Sinx or
Line.
Display sampling rate.
User‟s Guide for DS1000CA Series