RIGOL
Service
Press Utility→Service to go to the following menu.
Figure 2-100
Table 2-65 The Service menu
1. System Information
Press Utility→Service→System Info to display the information of the
oscilloscope. Product Model, Serial No. Software version and Installed module
of the oscilloscope. Follow the prompting message "<<Press „RUN/STOP‟ Key to
Exit the Test>>" to exit this interface.
2. Color Test
Select Color Test to enter the color test screen, the hue, saturation, brightness,
or red, green and blue components can be adjusted by turning the (
confirm selection by pushing the (
2-74
Menu
System Info
Color Test
Press to display system information.
Press to run color test.
) knob.
User‟s Guide for DS1000CA Series
Settings
) knob,