To Verify The Installation (Solaris Os) - Oracle Sun StorageTek ATCA 4Gb FC Dual Installation Manual

FIGURE 2-4

▼ To Verify the Installation (Solaris OS)

1. Use the
% cfgadm
Ap_Id
c3
c4
pcie5
If the HBA is properly installed and connected, you will see output similar to that
shown in the example.
2. If an HBA adapter is shown as unconfigured or disconnected, use the cfgadm
-c configure command to configure the adapter.
LEDs
command to verify proper HBA installation.
cfgadm
Type
fc
fc
fibre/hp
Receptacle Occupant
connected configured
connected configured
connected configured
Chapter 2 Hardware Installation and Removal
Condition
ok
ok
ok
13