Electrical Connections; Motor Specifications; Power Supply - Craftsman 113.197250 Operator's Manual

1o" electronic radial saw with 23" cabinet and 1 door; 10" electronic radial saw with leg set
Hide thumbs Also See for 113.197250:
Table of Contents

Advertisement

Electrical Connections
Motor Specifications
The AC motor
used in this saw is a capacitor-
start, non-reversible
type having the following
specifications:
Rated
H.P ..........................
1.5
Maximum
Developed
H.P .............
2.5
Voltage
...........................
120
Amperes
..........................
11
Hertz (cycles)
.......................
60
Phase
...........................
Single
RPM
.............................
3450
Rotation
of Arbor Shaft
.........
Clockwise
Power Supply
,_
WARNING:
Your saw is wired at
the factory for 120V operation.
Connect
to a 120V, 15-AMP,
branch
circuit and
use a 15-AMP,
time delay fuse or circuit
breaker.
Failure to connect
in this way
can result in injury from shock or fire.
A
_
_l& WARNING:
To avoid shock or fire, if
power cord is worn, cut, or damaged
in
any way have it replaced
immediately.
Your unit is wired for 120V, it has a plug that
looks like the one shown below. O:igure
107)
@
3-Prong Plug
Grounding
Prong
_-
Properly
Grounded
Outlet
Fig. 107- Plug for Less Than 150V
Your saw must be properly
grounded.
Not all
outlets
are properly
grounded.
If you are not
sure that your outlet
is properly
grounded,
have it checked
by a qualified
electrician.
WARNING:
If not properly
grounded
this power tool can cause
electrical
shock, particularly
when used
in damp locations.
_I&WARNING:
If an electrical
shock oc-
curs, your reaction
to the shock may
bring your hands into contact with the
blade.
This power tool is equipped
with a 3-
conductor
cord and grounding
type plug listed
by Underwriters'
Laboratories.
The ground
conductor
has a green jacket
and is attached
to the tool housing
at one end and to the
ground
prong in the attachment
plug at the
other end.
This plug requires a mating 3-conductor
grounded type outlet as shown above. If you
have an outlet that is of the two prong type, it
is recommended
that you have a qualified
electrician replace the it with a properly
grounded three prong outlet.
46

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

113.197210

Table of Contents