Adding A Fax Point - Nortel Voice Mail 4.0 FAX Set Up And Operation Manual

38 Setting up and maintaining Fax-on-demand mailboxes

Adding a Fax Point

A Fax Point gives a caller access to a Fax-on-demand Mailbox. This mailbox
provides a caller with single-digit access to a fax or list of faxes. If a CCR Tree does
not already exist, you must create one. The Home Menu must exist before you can
add a Fax Point.
For information about adding Fax messages, refer to
a fax machine telephone"
page 32.
To add a Fax Point:
Log:
QUIT RETRY
Admin
MBOX AA
Admin
GLIST
CCR Admin
CCR tree:
RETRY
Tree: 1
PRINT
Path:
RETRY END
<x>
MENU INFO
<x>
XFER LVMSG
<x>
ERASE
Mbox:
Destination?
PREV HOME
FAX Set Up and Operation Guide
on page 31 or
ƒ · ° ‹
1. Press
2. Enter the System Coordinator Mailbox number and
password and press OK.
3. Press OTHR.
4. Press CCR.
OTHR
5. Press ADMIN.
6. Enter the CCR Tree number and press OK. The CCR
Tree number is a number from 1 to 4.
7. Press CHNG.
QUIT
8. Enter the Path number and press OK.
9. Press OTHR. The x shown in steps 9 to 11
represents the Path number.
10. Press OTHR.
11. Press FAX.
12. Enter the Fax-on-demand Mailbox number.
QUIT
13. Press PREV to return the caller to the previous point.
DISC
Pressing HOME returns the caller to the Home Menu.
Pressing DISC disconnects the call.
"Adding a Fax message from
"Adding a Fax message from a disk"
.
on
P0886629 Issue 1.0