Appendix C: Technical Content Of A Loadable .Pcx File; Introduction - Nortel Voice Mail 4.0 FAX Set Up And Operation Manual

Hide thumbs Also See for Voice Mail 4.0 FAX:
Table of Contents

Advertisement

Appendix C: Technical content of a loadable
.PCX file

Introduction

Norstar Voice Mail FAX supports Paintbrush for Windows 95 .PCX files (black &
white only). If you are using another application, ensure that the file format is
compatible with the information shown in the following table. The following table
shows the required content of the .PCX file header.
Required content of the .PCX file header
Offset
Length
0
1
1
1
2
1
3
1
4
2
6
2
8
2
10
2
12
2
14
2
16
48
64
1
65
1
66
2
68
60
Note: For more information about the file header and your software application,
contact your PC software retailer.
P0886629 Issue 1.0
Description
.PCX identification. Must be 0x0A.
Version information. A value of 2 is suggested, but anything higher is
acceptable.
Encoding method. Must be 1.
Bits per pixels. Must be 1.
X position of upper left corner. Usually 0.
Y position of upper left corner. Usually 0.
X position of the bottom right corner. 1728 is the maximum. The
difference between this field and the upper left corner X position is the
width of the bitmap. The number must be a multiple of 8.
Y position of the bottom right corner. 2200 is the recommended
maximum.
Ignored in fax transmission mode.
Ignored in fax transmission mode.
Ignored in fax transmission mode
(palette Information).
Reserved. Must be 0.
Number of color planes. Must be1 in fax transmission mode.
Horizontal line width in bytes, equal to: (Xright - Xleft) 8
Reserved. Must be 0.
FAX Set Up and Operation Guide

Advertisement

Table of Contents
loading

Table of Contents