Assigning A Home Fax Point - Nortel Voice Mail 4.0 FAX Set Up And Operation Manual

Assigning a Home Fax Point

You can assign the Home Point of a CCR Tree as a Fax Point. The Home Point is
the first Point that callers get when they access a CCR Tree. For more information
about the Home Point, refer to the Norstar Voice Mail Set Up and Operation Guide.
If you assign the Home Point as a Fax Point, you cannot add any other Points to this
CCR Tree. Ensure the Fax-on-demand Mailbox is initialized before assigning the
mailbox number to a CCR Tree.
To assign a Home Fax Point:
Log:
QUIT RETRY
Admin
MBOX AA
Admin
GLIST
CCR Admin
CCR tree:
RETRY
New tree: <1>
0 Home/Menu
REC
0 Home/FOD
OTHR
Mbox:
Path:
RETRY
This completes assigning a Home Fax Point. For more information about designing,
building, changing, saving and enabling a CCR Tree, refer to the Norstar Voice
Mail Set Up and Operation Guide.
P0886629 Issue 1.0
Setting up and maintaining Fax-on-demand mailboxes 37
ƒ · ° ‹
1. Press
2. Enter the System Coordinator Mailbox number and
password and press OK.
3. Press OTHR.
4. Press CCR.
OTHR
5. Press ADMIN.
6. Enter the CCR Tree number and press OK. The CCR
Tree number is a number from 1 to 4.
7. Press BUILD.
QUIT
8. Press OTHR until you see the display in step 9.
OK
9. Press CHNG.
OK
10. Enter the Fax-on-demand Mailbox number.
QUIT
11. To save the CCR Tree, press END and follow the
OK
instructions that appear on the display.
®
12. Press
.
to end this programming session.
FAX Set Up and Operation Guide