Changing A Fax Point - Nortel Voice Mail 4.0 FAX Set Up And Operation Manual

Path:
RETRY
For more information about designing, building, changing, saving or enabling a
CCR Tree, refer to the Norstar Voice Mail Set Up and Operation Guide.

Changing a Fax Point

From CCR, you can change the Fax-on-demand Mailbox number and destination
of a Fax Point. To change the greeting, call method or Fax messages available, you
must open the Fax-on-demand Mailbox via
about changing the parameters of Fax-on-demand Mailboxes, refer to
the parameters of a Fax-on-demand Mailbox"
To change a Fax Point:
Log:
QUIT RETRY
Admin
MBOX AA
Admin
GLIST
CCR Admin
CCR tree:
RETRY
Tree: 1
PRINT
Path:
RETRY END
<x>
ERASE
Mbox: <xxx>
CHNG
Dest: <type>
P0886629 Issue 1.0
Setting up and maintaining Fax-on-demand mailboxes 39
14. To save the Tree, press END and follow the
OK
instructions that appear on the display.
®
15. Press
ƒ · ° ‹
1. Press
2. Enter the System Coordinator Mailbox number and
password and press OK.
3. Press OTHR.
4. Press CCR.
OTHR
5. Press ADMIN.
6. Enter the CCR Tree number and press OK. The CCR
Tree number is a number from 1 to 4.
7. Press CHNG.
QUIT
8. Enter the Fax Point Path number and press OK.
9. Press CHNG. The x represents the Path number.
Fax
OK
10. Press NEXT.
11. Press CHNG. The type shown on this display is the
OK
current destination type.
to end this programming session.
ƒ · ° ⁄
on page 28.
.
FAX Set Up and Operation Guide
. For information
"Changing