How To Use This Guide; Safety Instructions - Oki C9300 User Manual

How to use this Guide

This User's Guide describes the C9300/C9500 Finisher. The
printer is described in a separate document.
The contents of this Guide are arranged to take you through the
following steps to make the best use of the Finisher:
• Awareness of safety issues
• Finisher Components
• Finisher Installation
• Using the Finisher
• Troubleshooting
• Maintenance
Note: You are advised to read the sections of this document in
the order in which they are presented. Once you are
familiar with the equipment you can refer to specific
sections in isolation via the Table of Contents or Index.
For further information regarding general Printer functions,
please refer to the C9300/C9500 User's Guide.

Safety instructions

This machine has been carefully designed to provide years
safe, reliable performance. As with all electrical equipment,
however, there are a few basic precautions that should be taken to
avoid personal injury or damaging the machine:
• Read this guide carefully and save it for future reference.
•
Read and follow all warning and instruction labels on the
machine itself.
•
Disconnect the machine before cleaning. Use only a damp cloth.
Do not use liquid or aerosol cleaners to clean the machine.
•
Do not use the machine near water, or spill liquid of any kind into
it.
•
Make sure that the power source matches the rating listed on the
back of the machine. If you are not sure, check with your dealer
or with your local power company.
• To avoid damaging the power cable, do not put anything on it or
place it where it will be walked on. If the cable becomes damaged
or frayed, replace it immediately.
• The power outlet into which the machine is connected must
remain accessible at all times.
• Aside from the routine maintenance described in this user's
guide, do not try to service the machine yourself. Opening a
cover may expose you to shocks or other hazards.
2
of