Oki C9300 User Manual page 14

11. Push the Finisher towards the printer and check that the Finisher
inserts correctly into the Bridging Assembly. Check that you
can turn the Decurler Lever (1) to the horizontal position.
1
12. Check that the Finisher can be detached from the printer by
rotating the Decurler Lever (1) to point vertically downwards,
lifting the Release Lever (2) and pulling the Finisher away from
the printer.
13. Push the Finisher towards the printer until the Finisher is re-
attached to the printer.
11
1
2