3. Fit the new staples.
a. Remove the empty staple cartridge
from the Staple Cartridge unit.
b. Remove the new cartridge of sta-
ples from its packaging, but do not
yet remove the Tape (1).
c. Push the new cartridge of staples
into the Staple Cartridge unit until
a click is heard.
d. Remove the Tape (1).
4. Fit the Staple Cartridge unit into the Staple Unit.
WARNING:
Carefully avoid components and edges inside the Finisher.
a. Push the Staple Cartridge unit (1) into the Staple Unit (2)
until a click is heard.
b. Rotate the Staple Unit (2) in the direction of the arrow.
1
1
39
1
2