1-2
Ethernet Network Interface Card Configuration Guide
About this Chapter
Product Description
Physical Characteristics
Number
1
2
3
4
5
6
3
2
1
5
6
Description
TEST/RESET button - when pressed briefly while powering up the unit, returns
the NIC to its original factory default configuration.
NIC LED - blinks yellow quickly at power on and slowly during normal
operation to show unit is functioning.
BNC - Lights solid green to when a valid BNC network is attached to the NIC.
RJ45 port - for 10Base-T or 100Base-T network connections.
NET LED - blinks yellow to reflect network activity.
BASE-T LED - lights solid green to indicate a valid 10Base-T or 100Base-T
connection.
4