Disassembly And Replacement Of Sensors And Switches; Guide Upper Assy; Guide Rear Assy - Oki MJ-1038 Service Manual

4.2 Disassembly and Replacement of Sensors and Switches

4.2.1 Guide upper ASSY

(1) Take off the upper cover.
( P.4-1 "4.1.1 Upper cover")
(2) Take off the front cover.
( P.4-1 "4.1.2 Front cover")
(3) Remove 3 screws and take off the Finisher
control PC board ASSY [1].
(4) Remove 5 screws and 1 connector [1],
remove the Guide upper ASSY [3].

4.2.2 Guide rear ASSY

(1) Take off the upper cover.
( P.4-1 "4.1.1 Upper cover")
(2) Take off the front cover.
( P.4-1 "4.1.2 Front cover")
(3) Take off the rear cover.
( P.4-2 "4.1.3 Rear cover")
(4) Loosen 1 screw and take off the timing
belt [1].
45372301TH Rev.1
Oki Data CONFIDENTIAL
Fig. 4-4
[2]
Fig. 4-5
[1]
Fig. 4-6
[1]
[3]
4-3 /