Usage Menu Options; Print Driver Setting; Finisher-Related Settings - Oki C9300 User Manual

Enables or disables stapling
Stapling
Off
On

USAGE MENU options

Displays the number of staples used.
Stapling
Count
Displays the number of punch operations
Punching
completed.
count
Displays the number of sheets ejected to the
Finisher
Finisher.
count
Disables stapling (default
setting)
Enables stapling

Print Driver Setting

The operating systems supported are as follows:
PostScript: Windows 95, 98, Me, 2000, NT4, XP, Macintosh
PCL: Windows 95, 98, Me, 2000, NT4, XP.
Note: The following instructions explain the driver settings
involved to use the Finisher. Other settings are explained
in your printer's User's Guide.

Finisher-related settings

The settings required for the Finisher are:
1. Enable the Finisher in the printer driver.
2. Define the number of paper trays installed (a total of 5, i.e. 1
original tray, 1 additional tray and 1 high capacity feed unit).
3. Define the paper orientation (Portrait, Landscape or
Landscape with 180 deg rotation of printed data) to suit your
punching and/or stapling requirements.
No rotation
Portrait Staple top left
Punch left long edge
Landscape Staple top right
Punch top edge
20
180 deg rotation
Staple bottom right
Punch right long edge
Staple bottom left
Punch bottom edge