New Installation On Remote Management Client - Hitachi XP P9500 User Manual

To manually perform an installation on the remote management client, follow
the procedure in
3-6. To perform an unattended installation, follow the procedure in
Unattended installation on remote management client on page

New installation on remote management client

1 Log on to Windows on the remote management client as a member of the
.
Administrators group.
2 Save the license key file directly under the Windows installation-
.
destination drive.
installation-drive:\hdlm_license
3 Insert the HDLM installation DVD-ROM.
.
4 In the displayed window, click the Install button next to for VMware in
.
Hitachi Dynamic Link Manager Software.
If the window is not displayed, directly execute the installer (setup.exe).
The installer is stored in drive-containing-installation-DVD-ROM:\HDLM
VMware.
Windows 7, Windows Server 2008, and Windows Vista support User
Account Control (UAC). Therefore, if you execute the installer as a user
other than Administrator, you might be asked for administrator
permissions. If you are asked for administrator permissions, respond to
the displayed dialog box.
5 Follow the instructions shown in the messages that appear in the window.
.
¢
¢
6 Follow the instructions shown in the messages that appear in the window.
.
7 When the installation process has completed, launch the Administrator:
.
Command Prompt window.
8 Execute the HDLM command's view operation to confirm that HDLM has
.
been installed.
An example of executing the dlnkmgr command's view operation is as
follows:
>dlnkmgr -l view -sys
HDLM Version
Service Pack Version
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
>
If x.x.x-xx is displayed in HDLM Version, the correct version of HDLM has
been installed.
3-6
New installation on remote management client on page
If a license key file was saved in step 2, specify that license key file.
If a license key file is not being used, specify the license key directly.
-
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for VMware(R))
: x.x.x-xx
:
3-7.