Deployment Of The Virtual Storage Appliance; Navigating The Hp Storeonce Management Console (Gui) - HP StoreOnce User Manual

but the Admin user may change this via the GUI or CLI. Any password change applies to both
the GUI and CLI.
Operator: This account is available if the administrator wishes to provide limited access to the
GUI and CLI to certain users whose access will be restricted to monitoring and viewing. The
initial user name and login is Operator and operator, but the Admin user may change this
via the GUI or CLI.
After installation, a user with an Admin login may set up additional user accounts and assign a
role (admin or user) and password to these users. See
NOTE: There is a third account reserved for HP Support to which no other users have access.
However, it is important to know that the HP Support user can only gain access to this account via
the Admin login.
Tip
To find out what type of user rights you have, look at the title bar. This shows your User Name and
User Role. See

Deployment of the Virtual Storage Appliance

HP StoreOnce VSA is a software-only version of the HP StoreOnce Backup System. Packaged as
a virtual appliance, it can be deployed and run on a vmware vSphere hypervisor (v5.x) installed
by the customer. Once deployed, the customer has access to the StoreOnce Management Console
for both Web Management via the GUI and command line management via the CLI. The StoreOnce
VSA Backup System supports 10 x 1 TB virtual disks.
The customer is able to create the following backup target devices on the HP StoreOnce VSA:
Catalyst stores
iSCSI VT libraries
CIFS NAS shares
The virtual appliance is fully compatible with StoreOnce hardware products for replication and
Catalyst Copy functions and is fully integrated within HP StoreOnce Enterprise Manager, both for
ease of management and for ease of deployment.
There are two methods of deployment:
Using StoreOnce Enterprise Manager, SEM 1.0
Using vSphere Client (v5.x)
Instructions for deployment are in the HP StoreOnce VSA Deployment and Configuration guide.
Please consult the guide to deploy your StoreOnce VSA backup system.

Navigating the HP StoreOnce Management Console (GUI)

The HP StoreOnce Management Console is the main interface for:
Monitoring the status and health of the HP StoreOnce Backup system and all configured backup
devices
Creating and modifying VTL and NAS StoreOnce backup targets and Catalyst stores
Managing replication relationships and housekeeping
To run the StoreOnce Management Console
To log on using the StoreOnce Management Console, use any machine connected to the
management network. The HP StoreOnce Backup system uses a secure network connection.
Enter: https://<IP_address>
(page 8).
User Management (page
Deployment of the Virtual Storage Appliance
111).
7