Items Required - HP Surestore 6164 - Switch Reference Manual

Items Required

Installing and Configuring the FC 6164
The following items must be available before you begin the installation
procedures:
• FC 6164
• 30" deep rack space, 14 rack units high and 19" wide
• Six Ethernet cables, one for each switch
• Six power outlets, one for each switch
• FC 6164 worksheet, provided in
• Serial cable connected to the workstation, long enough to connect to
each of the switches in the chassis
• Workstation that has a terminal emulator application (such as
HyperTerminal)
• Six unused IP addresses
• Ethernet connection between the workstation and the FC 6164 (such as
through a hub)
• #2 Phillips screwdriver
• T20 Torx screwdriver
• Genie lift (to transport the switch) For information on the lift, see:
http://www.genielift.com/ml-series/ml-1-2.html
or
http://slick2.atl.hp.com/ceworld/siteservices/tools/genie/genielift_ordering.htm
Appendix A, "FC 6164 Worksheet"
27