HP Surestore 6164 - Switch Reference Manual page 203

Example
See Also
Telnet Commands
The following example shows the noninteractive form of
sgroupSwReplace. The sgroupShow command is used to illustrate the
changes made with the sgroupSwReplace command.
sw:admin> sgroupShow
Group Type Group Name
================ =================================
S32_6_1 NewGroup
value = 0
sw:admin> sgroupSwReplace "NewGroup",
"10:00:00:60:69:20:22:22",
"10:00:00:60:69:20:55:55"
Committing configuration...done.
sw:admin> sgroupShow
Group Type Group Name
================ =================================
S32_6_1 NewGroup
sgroupDelete
sgroupRename
sgroupSet
sgroupShow
sgroupSupportShow
Member WWN
10:00:00:60:69:20:15:71
10:00:00:60:69:20:15:93
10:00:00:60:69:20:15:2a
10:00:00:60:69:20:18:32
10:00:00:60:69:20:22:22
10:00:00:60:69:20:64:31
Member WWN
10:00:00:60:69:20:15:71
10:00:00:60:69:20:15:93
10:00:00:60:69:20:15:2a
10:00:00:60:69:20:18:32
10:00:00:60:69:20:55:55
10:00:00:60:69:20:64:31
203