Switch Events View
Using Fabric Manager
WWN
Unique numeric identifier for each switch; assigned by
manufacturer.
Domain ID
Number that uniquely identifies the switch in a fabric.
Role
Indicates the current role of the switch.
• Principal
• Subordinate
• Disabled
State
Indicates the current state of the switch, which can be
online, offline, testing, or faulty.
Firmware
Fabric OS version.
Serial #
The serial number of the switch being viewed.
Ether IP
Ethernet IP address.
Ether NM
Ethernet netmask value.
FC IP
Fibre channel IP address.
FC NM
Fibre channel netmask value.
Gateway
IP address of default gateway. Must be properly set to
access switch from other networks.
Switch Events View displays a log of events for the selected switch.
To access Switch Events View:
1. Select Start >Programs > Fabric Manager > Fabric Manager.
The URL window displays.
2. Enter the switch name or IP address in the blank field.
This switch is assumed to be the local domain.
Note
The principal switch as defined by
FC_SW protocol.
Enabled but not the principal switch.
Disabled.
133