HP Surestore 6164 - Switch Reference Manual page 44

44
12.Re-attach the rack-mount bracket adjustable plates:
a. From the front of the rack, slide the switch forward a small distance.
b. Insert one of the adjustable plates into one the stationary plates (see
Figure 16).
Figure 16. Re-attaching the Rack-Mount Bracket Adjustable Plates
c. Insert the screws you removed in Step
the stationary plate and into the second set of threaded holes in the
adjustable plate from the rack-mounting flange (see
not tighten the screws at this time.
d. Repeat Steps b
of the switch.
e. Move the switch forward in the rack as far as it can go. The amount
of movement is limited by the rack-mount bracket adjustable plates
contacting the rack uprights.
HP Surestore FC Switch 6164 Installation and Reference Guide
and c for the rack-mount bracket on the opposite side
6a through the slotted holes in
Figure 16). Do