Telnet Interface
Configure
selected port(s) to
be long distance
level
Commit
Configuration
Changes
Reset
Current Extended
Fabric Settings
Each switch can only have one active Telnet session at a time.
The Telnet interface requires administrative privileges. When an
Note
administrative login is entered, administrative privileges remain available
from that workstation until the session is closed and the web browser is
exited.
To access the Telnet interface through Fabric Manager:
1. Select Start >Programs > Fabric Manager > Fabric Manager.
The URL window displays.
2. Enter the switch name or IP address in the blank field.
This switch is assumed to be the local domain.
Note
3. Press the Enter key to submit the address.
Fabric Manager launches, displaying the default view, Fabric View.
Select the long-distance level to be supported for the
selected ports. There are three levels available:
• No long distance
• 50 KM
• 100 KM
Click to apply configuration for Extended Fabric.
Click to reset all fields to values present when
Extended Fabric was launched.
Displays current settings by port number.
179