Equipment Symbols; Required Tools - HP storevirtual 3200 User Manual

Equipment symbols

Symbol

Required tools

The following items are required for some replacement procedures:
• Flat-head screwdriver
• T-25 Torx screwdriver
Description
Any enclosed surface or area of the
equipment marked with these symbols
indicates the presence of electrical shock
hazards. Enclosed area contains no
operator serviceable parts.
Any RJ-45 receptacle marked with these
symbols indicates a network interface
connection.
Any surface or area of the equipment
marked with these symbols indicates the
presence of a hot surface or hot
component.
Power supplies or systems marked with
these symbols indicate the presence of
multiple sources of power.
Any product or assembly marked with these
symbols indicates that the component
exceeds the recommended weight for one
individual to handle safely.
Warning
To reduce the risk of injury from electrical
shock hazards, do not open this enclosure.
To reduce the risk of electrical shock, fire,
or damage to the equipment, do not plug
telephone or telecommunications
connectors into this receptacle.
Contact with this surface could result in
injury.
To reduce the risk of injury from electric
shock, remove all power cords to
completely disconnect power from the
system.
To reduce the risk of personal injury or
damage to the equipment:
• Remove all hot-pluggable power
supplies and modules to reduce the
overall weight of the device before
lifting.
• Observe local health and safety
requirements and guidelines for manual
material handling.
• Get help to lift and stabilize the device
during installation or removal, especially
when the device is not fastened to the
rails. When a device weighs more than
22.5 kg (50 lb), at least two people must
lift the component into the rack together.
If the component is loaded into the rack
above chest level, a third person must
assist in aligning the rails while the other
two support the device.
Equipment symbols 51