Access Gateway And Brocade Mibs - Brocade Communications Systems StoreFabric SN6500B Reference Manual

4. In the Manager (SNMP Browser), create a user snmpadmin1 with Authentication protocol as
NOTE
SNMPv3 supports AES128 and DES protocols. SNMPv3 does not support privacy protocols AES192,
AES256, and 3DES.

Access Gateway and Brocade MIBs

Table 4
TABLE 4 .
MIB name
MIB-2
Entity-MIB
HA-MIB
SW-MIB
FA-MIB
Fabric OS MIB Reference
53-1002750-01
(0 = No security, 1 = Authentication only, 2 = Authentication and Privacy, 3 =
No Access): (2..3) [2] 2
switch:admin> snmpconfig --show secLevel
GET security level = 2, SET level = 2
SNMP GET Security Level: Authentication and Privacy
SNMP SET Security Level: Authentication and Privacy
To set the security level to default:
DCX_128:FID128:admin> snmpconfig --default seclevel
GET security level = 0, SET level = 0
SNMP GET Security Level: No security
SNMP SET Security Level: No security
SNMP GET Security Level will be set to 'No Security'
SNMP SET Security Level will be set to 'No Security'
Do you want to continue? (yes, y, no, n): [no] y
DCX_128:FID128:admin>
DCX_128:FID128:admin> snmpconfig --show seclevel
GET security level = 0, SET level = 0
SNMP GET Security Level: No security
SNMP SET Security Level: No security
DCX_128:FID128:admin
noAuth, Privacy protocol as noPriv, set the password and set the trap port as 162. (Same
values are set as in the switch SNMPv3 configuration.)
shows the MIBs supported by Brocade Access Gateway.
Access Gateway MIB support
Supported
Yes
Yes
Yes
No
Yes

Access Gateway and Brocade MIBs

Description
Updated to support Access Gateway in v5.2.1.
Supported in Access Gateway.
Supported in Access Gateway.
Disabled in Access Gateway because the conventions are specific to
fabric switches.
In Fabric OS v6.4.0, swConnUnitPortExtensionTable is supported in
Access Gateway mode.
In Fabric OS v7.0.0, SNMP allows you to access the following tables
to support the Advanced Performance Monitoring feature on Access
Gateway, even if the SW-MIB is disabled:
•
"swBlmPerfEEMntTable"
•
"swBlmPerfFltMntTable"
The connUnitSnsTable is not supported because a switch in Access
Gateway does support name server services.
1
19